Got Mold?

6/6/2019 (Permalink)

Molds can be found almost anywhere; they can grow on virtually any organic substance, as long as moisture and oxygen are present. There are molds that can grow on wood, paper, carpet, foods, and insulation. When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed. It is impossible to eliminate all mold and mold spores in the indoor environment. However, mold growth can be controlled indoors by controlling moisture indoors.

Molds reproduce by making spores that usually cannot be seen without magnification. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. Molds gradually destroy the things they grow on.

Since mold requires water to grow, it is important to prevent moisture problems in buildings. Moisture problems can have many causes, including uncontrolled humidity. Some moisture problems in buildings have been linked to changes in building construction practices during the 1970s, 80s and 90s. Some of these changes have resulted in buildings that are tightly sealed, but may lack adequate ventilation, potentially leading to moisture buildup. Building materials, such as drywall, may not allow moisture to escape easily. Moisture problems may include:

• Roof leaks
• Landscaping or gutters that direct water into or under the building
• Unvented combustion appliances
• Delayed maintenance or insufficient maintenance are also associated with moisture problems in schools and large buildings

Moisture problems in portable classrooms and other temporary structures have frequently been associated with mold problems.

Remediators should avoid exposing themselves and others to mold-laden dusts as they conduct their cleanup activities. Caution should be used to prevent mold and mold spores from being dispersed throughout the air where they can be inhaled by building occupants.

Each scenario requires a unique solution, but the general process stays the same. When you discover mold, call us at 941-365-4614 and we will go through our standard mold remediation process: 

• Inspection and Mold Damage Assessment
• Mold Containment
• Air Filtration
• Removing Mold and Mold-Infested Materials
• Cleaning Contents and Belongings
• Restoration

If You See Signs of Mold, call  SERVPRO of North Sarasota Today – 941-365-4614